See translational bridging, use DLSW, it's easier. I used to have a great URL but in the 1000th amelioration of CCO my URL nolonger works.
Dave Andrew Larkins wrote: > > We had a similar issue when we tried here. There is a command that does > bitswopping. I can't remember the command but it is in global config : > something like "bridge 1 bitswap....." > > HTH > > Andrew > > -----Original Message----- > From: Erlend Ringstad [mailto:[EMAIL PROTECTED]] > Sent: 02 October 2001 12:12 PM > To: [EMAIL PROTECTED] > Subject: translation/transparent bridging between tokenring and ethernet > [7:21651] > > Greetings > > What I am trying to achive, transparent bridging/translation > bridging between token ring and ethernet. > > I have one host on the To0/0: > 10.10.10.1 netmask 255.255.255.0 > and another one on the ethernet segment: > 10.10.10.2 netmask 255.255.255.0 > > The config below does not work, and ideas? > > no ip routing > ! > interface Ethernet0/0 > no ip address > bridge-group 1 > ! > interface TokenRing0/0 > no ip address > ring-speed 16 > bridge-group 1 > ! > bridge 1 protocol ieee > > --erlend -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21672&t=21672 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
