Hi,
I can depend on the telco ISDN config. I must allow a POTS connection in.
Also the router must be able to handle "modem" connections and be configured
to do the job.
interface Group-Async1
no ip address
encapsulation ppp
async dynamic address
async mode dedicated
no snmp trap link-status
dialer in-band
dialer rotary-group 0
no fair-queue
no cdp enable
group-range 1 8
!
interface bri#/#
ip unnumbered Loopback1
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
no snmp trap link-status
isdn incoming-voice modem
dialer idle-timeout 2147483
dialer-group 1
no fair-queue
no cdp enable
ppp authentication chap
ppp multilink
hold-queue 75 in
The above snippets may not be exact for your application but give the idea
of what is required.
Teunis
Hobart, Tasmania
Australia
On Tuesday, October 02, 2001 at 06:19:03 PM, Cisco wrote:
> Hi Guys!!
>
> I have a topology with a 2620 router with 8 BRI S/T ports that will receive
> dial backup calls from remote locations using ISDN. The problem is that we
> don4t have ISDN service available on all of these locations. So my question
> is: is it possible to terminate a call originated from a POTS line on the
> ISDN BRI ports of the router?? I tried to call one of these ports from a
> POTS line and received the messages below from the ISDN debug. The router
> did not answer the calls. Some of the messages say that it4s not an ISDN
> end-to-end call, which is obvious. Is there anyway of making it work??
>
> *Mar 8 00:49:26.014: Progress Ind i = 0x8A81 - Call not end-to-end
> ISDN,
> may have in-band info
>
> *Mar 8 00:49:26.018: Calling Party Number i = 0x0083,
> '07191338625',
> Plan:Unknown, Type:Unknown
>
> *Mar 8 00:49:26.026: ISDN BR1/3: Event: Received a call with a bad
> bearercap
> from 07191388225 on B1
>
> *Mar 8 00:49:29.498: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR1/3,
> TEI 68 changed to down
>
> Thanks in advance!!
>
> Ednilson Rosa
--
www.tasmail.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21748&t=21738
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
