Can you provide a URL for this. Before the DS3 NM was even available you could buy an OC3 NM. I would believe that maybe the 3620 doesn't have quite the horse power but a 3660 on the other hand I'm pretty confident can handle a DS3.
Dave Robert Padjen wrote: > > Please note that the 3600 cannot service more than 20 > Mbps on an interface - ie, you cannot drive a HSSI, > DS-3 or OC-3. > > --- "George Murphy CCNP, CCDP" > wrote: > > John we went with IMA cards in our 2600s when we > > went frame to ATM > > > > John Neiberger wrote: > > > > > I apologize for this but I'm having a tough time > > getting good > > > information. We're considering migrating from our > > frame relay network > > > to ATM. We were planning on doing some other > > upgrades anyway that > > > include adding 2620 routers at our branches. Our > > provider says that > > > they offer ATM in 3 Meg increments but it comes in > > on DS3 facilities. > > > > > > Do any of you know what network module I'd need > > for this? The 2600 has > > > the NM-1ATM-25 available that sounds close, but > > it's for ADSL and we > > > aren't doing that. Will it still work? Or, do I > > need a 3600 series > > > router with a HSSI interface? > > > > > > Or, alternately, should I just get that lobotomy > > I've been > > > considering?? > > > > > > Thanks! > > > > > > John > [EMAIL PROTECTED] > > ===== > Robert Padjen > > __________________________________________________ > Do You Yahoo!? > NEW from Yahoo! GeoCities - quick and easy web site hosting, just > $8.95/month. > http://geocities.yahoo.com/ps/info1 -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22110&t=21742 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
