Where is the gs7-pv-mz.111-12.CA1.bin is located? On the Boot ROMs on on the Flash Card in slot0: ? Dave below gave you the correct statement to add to your configuration file. There is an exhaustive treatment of this on CCO in the 7000 router area. Also check any of the IOS Configuration Guides under "Configuration Fundamentals." Good luck.
> -----Original Message----- > From: Mohammed Nabelsi [mailto:[EMAIL PROTECTED]] > Sent: Thursday, October 04, 2001 8:47 PM > To: [EMAIL PROTECTED] > Subject: Re: tftp server download bombed!! [7:21975] > > > Hi, > I am running version 11.1, but unable to get it to boot from slot0: > Any suggestion! > Thanks > > > Router#sh ver > Cisco Internetwork Operating System Software > IOS (tm) GS Software (GS7-PV-M), Version 11.1(12)CA1, EARLY DEPLOYMENT > RELEASE SOFTWARE (fc1) > Synced to mainline version: 11.1(12) > Copyright (c) 1986-1997 by cisco Systems, Inc. > Compiled Tue 08-Jul-97 03:50 by richardd > Image text-base: 0x00001000, data-base: 0x005C6CF4 > > ROM: System Bootstrap, Version 5.0(2), RELEASE SOFTWARE > ROM: GS Software (GS7), Version 10.0(2), RELEASE SOFTWARE (fc1) > > Router uptime is 0 minutes > System restarted by reload > System image file is "gs7-pv-mz.111-12.CA1.bin", booted via flash > > > > > ----- Original Message ----- > From: "MADMAN" > To: > Sent: Thursday, October 04, 2001 5:27 PM > Subject: Re: tftp server download bombed!! [7:21975] > > > > Certainly, "boot system flash slot0:myfavoritefile" > > > > Old 7000's with pre 11.0 boot proms would not recognize the slot0 > > though > > > > Dave > > > > Mohammed Nabelsi wrote: > > > > > > On Cisco 7000, can you boot from slot0:. If yes, how? > > > Best Regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22164&t=22164 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
