As I mentioned yesterday, if memory serves me and it generally does, you need 11.0 bootroms!!!!
Dave Mohammed Nabelsi wrote: > > Hi, > I am running version 11.1, but unable to get it to boot from slot0: > Any suggestion! > Thanks > > Router#sh ver > Cisco Internetwork Operating System Software > IOS (tm) GS Software (GS7-PV-M), Version 11.1(12)CA1, EARLY DEPLOYMENT > RELEASE SOFTWARE (fc1) > Synced to mainline version: 11.1(12) > Copyright (c) 1986-1997 by cisco Systems, Inc. > Compiled Tue 08-Jul-97 03:50 by richardd > Image text-base: 0x00001000, data-base: 0x005C6CF4 > > ROM: System Bootstrap, Version 5.0(2), RELEASE SOFTWARE > ROM: GS Software (GS7), Version 10.0(2), RELEASE SOFTWARE (fc1) > > Router uptime is 0 minutes > System restarted by reload > System image file is "gs7-pv-mz.111-12.CA1.bin", booted via flash > > ----- Original Message ----- > From: "MADMAN" > To: > Sent: Thursday, October 04, 2001 5:27 PM > Subject: Re: tftp server download bombed!! [7:21975] > > > Certainly, "boot system flash slot0:myfavoritefile" > > > > Old 7000's with pre 11.0 boot proms would not recognize the slot0 > > though > > > > Dave > > > > Mohammed Nabelsi wrote: > > > > > > On Cisco 7000, can you boot from slot0:. If yes, how? > > > Best Regards > > > > > > ----- Original Message ----- > > > From: "Leigh Anne Chisholm" > > > To: > > > Sent: Thursday, October 04, 2001 12:32 PM > > > Subject: RE: tftp server download bombed!! [7:21975] > > > > > > > Erlend, you're half right. There's two ways to boot from TFTP. Yours > > and > > > > "Cisco Nuts". This is his way (and from this output, you can also see > > > where > > > > you can use your method... > > > > > > > > RouterA(config)#boot ? > > > > bootstrap Bootstrap image file > > > > buffersize Specify the buffer size for netbooting a config file > > > > host Router-specific config file > > > > network Network-wide config file > > > > system System image file > > > > > > > > RouterA(config)#boot system ? > > > > WORD TFTP filename or URL > > > > flash Boot from flash memory > > > > mop Boot from a Decnet MOP server > > > > rcp Boot from a server via rcp > > > > rom Boot from rom > > > > tftp Boot from a tftp server > > > > > > > > RouterA(config)#boot system tftp ? > > > > WORD Configuration filename > > > > > > > > RouterA(config)#boot system tftp c1600-j-p.bin ? > > > > Hostname or A.B.C.D Address from which to download the boot config > > file > > > > > > > > > > > > RouterA(config)#boot system tftp c1600-j-p.bin 172.16.1.1 ? > > > > > > > > > > > > RouterA(config)#boot system tftp c1600-j-p.bin 172.16.1.1 > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf > Of > > > > > Erlend Ringstad > > > > > Sent: Thursday, October 04, 2001 1:33 AM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: Re: tftp server download bombed!! [7:21975] > > > > > > > > > > > > > > > the command is: > > > > > boot system image ip > > > > > not boot system tftp image ip > > > > > > > > > > At 04:34 04.10.2001, Cisco Nuts wrote: > > > > > >Hello, > > > > > >Just configured a 2501 router as a tftp server with the command: > > > > > ># tftp-server flash:c2500-ins-l.120.bin 10 > > > > > ># access-list 10 permit 172.16.12.0 > > > > > > > > > > > >Can ping to the client router at 172.16.12.2 > > > > > > > > > > > >On the client router configed the following: > > > > > ># no boot system > > > > > ># boot system tftp c2500-ins-l.120.bin 172.16.12.1 > > > > > ># boot system rom > > > > > ># config-register 0x010F > > > > > ># end > > > > > ># wr > > > > > ># reload > > > > > > > > > > > >When ther router reboots, I get the following error msg. > > > > > >"%SYS-4-CONFIG_NEWER: Configurations from version 11.3 may not > > > > > be correctly > > > > > >understood. > > > > > >Loading c2500-ins-l.120-19.bin [File not found] > > > > > >Flash boot: File 'c2500-d-l.113-11a.bin' open failed. > > > > > > > > > > > >Sleeping for 2 secs before next netboot attempt > > > > > >Loading c2500-ins-l.120-19.bin [File not found] " > > > > > > > > > > > >And then the router finally boots to a R1-Moritz(boot)> prompt. > > > > > > > > > > > >Can someone help out? Please advise. > > > > > >Thank you. > > > > > >Kind regards. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > >Get your FREE download of MSN Explorer at > > > > http://explorer.msn.com/intl.asp > > -- > > David Madland > > Sr. Network Engineer > > CCIE# 2016 > > Qwest Communications Int. Inc. > > [EMAIL PROTECTED] > > 612-664-3367 > > > > "Emotion should reflect reason not guide it" -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22213&t=21975 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
