Hi, It does take the command: #standby ip 192.168.21.10 but not the preempt and priority commands. I am using a 2511 router for this. Here is the #sh ver output: RTF#sh ver Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-D-L), Version 12.0(9), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Mon 24-Jan-00 22:06 by bettyl Image text-base: 0x030387D0, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) RTF uptime is 1 day, 14 hours, 1 minute System restarted by reload System image file is "flash:c2500-d-l.120-9.bin" cisco 2511 (68030) processor (revision M) with 2048K/2048K bytes of memory. Processor board ID 07144242, with hardware revision 00000000 Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 16 terminal line(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY) Please advise. Thank you. Kind regards. >From: "Richard Botham" >Reply-To: "Richard Botham" >To: [EMAIL PROTECTED] >Subject: RE: HSRP error with a BGP config!! [7:22179] >Date: Fri, 5 Oct 2001 05:48:41 -0400 > >What type of router are you using. >It looks like you may be using MHSRP fom the show standby > >CCO states that some older lower end routers using Lance /Quicc ethernet >hardware will only support a single hsrp group and therefore only a single >unicast mac address. >Hope this helps. >Richard _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22253&t=22179 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
