I haven't seen that one but I recently had a customer that could not get this custom server to connect on a 6509 pwr card. I then tried disabling the power, "set port inlinepower mod/port off" and that fixed it. I assume that there may be a similiar comand on the 35xx that disables power.
Dave Richard Dennard wrote: > > Hello everyone, > > Problems with 3524-PWR-XL? Has anyone had any problems with this switch > injecting power on ethernet cards causing them to burn out? We have had > to replace over 100 cards this month and cannot determine resolution. > Cisco says it supplies power to only devices that require it or can > accept it, but I can't find anything else that could do this. I know > this is not the venue to ask job related questions but have run out of > resources. (ex. CCO, TAC, etc.) Any thoughts on this would be > appreciated... Thanks for your help. > > Richard Dennard > Systems Engineer CCNA CCDA > Central Data, Inc. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23415&t=23415 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
