It won't unless you do the config change via either CiscoView or SNMP by
scheduling the change through the Change Audit piece. You must go to
RME/Configuration Management/Update Archive to get CWRKS2000 to learn about
changes made via the CLI.
John Squeo
Technical Specialist
Papa John's Corporation
(502) 261-4035
"Okuwa,
Daley"
cc:
Sent by: Subject: Config Changes on
Cisco Works [7:23539]
nobody@groupst
udy.com
10/19/01
01:25
PM
Please
respond
to
"Okuwa,
Daley"
All,
I am having problems retrieving router configs from Cisco works 2000 R.M.E
Whenever there is a change on the routers it does not save it or archive it
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=23553&t=23539
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
