I just wanted to double-check myself. The line #9 from the following "show interface token-ring 0" output says...
1.) TokenRing 0 is up, line protocol is up 2.) Hardware is Dual Token Ring, address is 0000.3080.5fca (bia 0000.3080.5fca) 3.) Internet address is 1.0.0.7, subnet mask is 255.0.0.0 4.) MTU 8136 bytes, BW 4000 Kbit, DLY 630 usec, rely 255/255, load 1/255 5.) Encapsulation SNAP, loopback not set, keepalive set (10 sec) 6.) ARP type: SNAP, ARP Timeout 4:00:00 7.) Ring speed: 16 Mbps 8.) Single ring node, Source Route Transparent Bridge capable 9.) Source bridging enable, srn 1 bn 2 trn 1000 (ring group) 10.) Proxy explorers disable, spanning explorer enabled, NetBIOS cache disable 11.) Group Address: 0x00000000, Functional Address: 0x0000011A local ring number - 1 bridge number - 2 ring group - 1000 Right? --- Dennis Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23640&t=23640 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
