I had a problem like this before on checking ,the memory and cpu utilization was very high .what i did was just to run a smaller size ios.This actually happen when i try configuring DLSW on the system.Try change your ios
Regards >try another IOS in order to eliminate a possible SW issue (yes, even though >it might of been working before without problem!) > >jaz > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of >routerjocky >Sent: 21 October 2001 08:05 >To: [EMAIL PROTECTED] >Cc: [EMAIL PROTECTED] >Subject: weird termsrv problem > > >I'm having a strange problem with my homelab 2511. Telnet sessions to the >terminal server just drop unexpectedly. No rhyme or reason to it. A 'clear >arp' command (from the console) allows me to access the terminal server >again. >No errors on the e0 interface are being generated. I've tried changing the >transceiver, cable, and moving to a different hub port, but none of those >changes seem to solve the problem. One of the weirdest 'flaky' problems >that >I've ever seen, and terribly frustrating because I can't diagnose the >problem >from the router. (next step: sniff the network) > >Has anyone seen this kind of behavior before? > >If so, what was the solution? > >If not, what's your best guess at what the problem could be? > >thanks in advance >-e- >May the route be with you >Switch if you must, route if you can ;-) >http://members.home.net/airwrck Ohanusi Anthony CCNA,CCNP,CCIE Written. WAN Engineer Network Solution, A Schlumberger Company Email : Phone : 234-1-2610446 EXT 3230 Fax : 234-1-2621034 Learn to qualify your statement Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23719&t=23719 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
