1. To create broadcast domain, you need at least one TrCRF and one TrBRF. Associate TrCRF with TrBRF you create, assign ring#, bridge# to them. Note that switch call both TrCRF and TrBRF vlan but they are not the same. If you want analogy to transparent bridge type of switch, TrBRF will more like that because TrBRF represent broadcast domain. 2. Go to Switch IP Config, select the TrBRF you want that in. Set mode to BootP when needed or always on.
CCIE Study Professional Checklist http://www.geocities.com/berdde/ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jacques Allison Sent: Monday, October 22, 2001 4:57 PM To: [EMAIL PROTECTED] Subject: Cisco Token Ring switch config [7:23756] What is the steps needed on a 3920 Token Ring switch to configure vlans and a switch IP address that can be used for management (ping-able from network) Regards, Jacques Allison Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23760&t=23756 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
