Cisco will recognize multiple macs on a single port but they must all be in the same vlan. Vlan assignment is per port. Your other option would be to replace the non cisco hub with a cisco switch which is trunked to the main switch.
-- -=Repy to group only... no personal=- ""NetEng"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Here's my situtation. I have a corporate PC with an IP address of 10.10.x.x > and in the same office (and same physical network) another device with an IP > address of 192.168.100.x Both devices are connected to a small hub/switch > which in turn is connected to a cisco switch. Can I have the 10.10.x.x be > apart of one vlan and the 192.168.100.x be a member of another or the > default vlan? Can cisco switches recognize multiple MAC addresses on a > single switch port (if so, how many?) and be smart enough to know which vlan > which MAC address belongs to? This would save me hours (otherwise I have to > run cable for connections to our corporate network and connections to our > test network in every cube :-( ). TIA > > PS I understand the best way to do this would be to connect each device into > the cisco switch, but I only have a single cable run to each cube/office > > > (corporate pc)10.10.x.x > | > PC PC (test network) 192.168.100.x > | | > \ / > \ / > SWITCH/HUB (non-cisco) > | > | > CISCO SWITCH > VLANs > -------- ---------- > | | | | > | corp | | test | > -------- ----------- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23957&t=23950 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
