it seems that you have an old mib. Try checking for a new mib from cisco http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of sam sneed Sent: Friday, October 26, 2001 10:20 AM To: [EMAIL PROTECTED] Subject: snmpset and port usage [7:24260] I would like to see which siwtchports are unused in the preparation for creating VLAN's on a 3548 switch. I want to use snmpset to zero all the interfaces.ifTable.ifEntry.ifOutOctets amd then use snmpget later in the week to determine port usage. I was able to set the sysContact so i know SNMP is properly configured on switch. The error i get is below: [root@wolf /root]# snmpget 172.16.10.10 private interfaces.ifTable.ifEntry.ifOutOctets.44 interfaces.ifTable.ifEntry.ifOutOctets.44 = 4050195071 [root@wolf /root]# snmpset -v 1 172.16.10.10 private interfaces.ifTable.ifEntry.ifOutOctets.44 i 0 Error in packet. Reason: (noSuchName) There is no such variable name in this MIB. This name doesn't exist: interfaces.ifTable.ifEntry.ifOutOctets.44 any ideas?????? sam sneed _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24270&t=24260 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
