what type of encapsulation you used CISCO , IETF? both routers should be using same encapsulation
also try using frame-relay map ip DLCI no broadcast to map the layer 2 to layer 3 regards, suaveguru --- Kenneth Yeung wrote: > Based on the frame-relay (Chapter 4 2nd Edition)in > Caslow's book: > S1 ------------- HQ -------------S2 > 172.16.1.1 172.16.1.2 172.16.1.3 > > With home lab testing as the above setting, > I can ping from HQ to S1 and S2. > I cannot ping from S1 and S2 even though I have put > in the frame-relay map > ip x.x.x.x local DLCI in both S1 and S2. > I still got the same debug message "encapsulation > fail". > > Any advice?! [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24343&t=24332 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
