One day, I discovered that one of the router continuously display an error message from the console showing that there is a bad authentication between HSRP members.
*Oct 27 07:15:19: %STANDBY-3-BADAUTH: Bad authentication from x.x.x.x, remote state Init Right now, there are only two routers forming the HSRP group. The configuration was extracted as below: Router1 interface Ethernet1 ip address x.x.x.245 255.255.255.0 standby 2 priority 200 preempt standby 2 ip x.x.x.254 Router2 interface Ethernet0/1 ip address x.x.x.247 255.255.255.0 standby 2 priority 150 preempt standby 2 ip x.x.x.254 The message was only discovered on Router1. When I tried to increase the priority of Router2 and make it becomes active. Then no error messages appeared. Anyone has an idea? Please advise. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24358&t=24358 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
