I am by no means a wireless, or 820.11, or an Aironet expert, but I will
take a stab at this one just the same.
You can adjust the size of your cells by various means.
The easiest would be to adjust the 'Transmit Power' (the mW setting on the
APs) to one of the lower values that are available from the AP under the
radio port hardware settings.
Another way is to set your AP and clients on 1MB ONLY, or 2MB ONLY etc....
effectively minimizing your cells to that range.
Ultimately, one could (and should) re-consider the antennae choice that was
made, to select a new antenna that fits the requirements better. Both Gain
and Direction paterns of the antenna should be considered.
This last, expenscive solution, shouldn't be considered unless you are
'showering' RF all around your neighbors and they are complaining, but if
all your RF is in your premises, the first two solutions, can and will
suffuce.
Hope I was of assistance, good luck.
--
Rgrds'
JG
---== Success, is where preparation, meets opportunity ==---
""IT Guy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi guys,
>
> Need your help!!!!!
> As per my knowledge,350 AP provides cell range of 39.6 m at 11 mbps..
> But what If I want to decrease the cell size and limit this range to 15
or
> 20 m??
> Can we get this done by decreasing power??IF yes how??
> Is there any criteria what range we can get at certain power levels.
>
> Thanks for help.
>
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=24409&t=24408
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
