hi all:
when i want to initial my fa 0/0 of the Cisco 3661 router with "no shut"
command, the router report a error message:
%AMDP2_FE-1-INITFAIL: CSR0=0x0000
Then i use "show diag " to get some more message about the main board,the
following is what i see:
Slot 0:
C3600 Mother board 1FE(TX) Port adapter, 1 port
Port adapter is analyzed deactivated
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
PCB Serial Number : JAB0422068V
Processor type : 34
Top Assy. Part Number : 800-05293-03
Board Revision : B0
Fab Part Number : 28-3234-02
Deviation Number : 65535-65535
Manufacturing Test Data : FF FF FF FF FF FF FF FF
RMA Number : 255-255-255-255
RMA Test History : FF
RMA History : FF
Field Diagnostics Data : FF FF FF FF FF FF FF FF
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 4A 41 42 30 34 32 32 30 36 38 56 09
0x10: 34 40 00 DA C0 46 03 20 00 14 AD 03 42 42 30 85
0x20: 1C 0C A2 02 80 FF FF FF FF C4 08 FF FF FF FF FF
0x30: FF FF FF 81 FF FF FF FF 03 FF 04 FF C5 08 FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00
Could somebody tell me what is the problem it would be from above
information? thx a lot.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=24753&t=24753
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
