Hi , - about dial up connections It depends on your requirements and protocols used , because you can use E1 PRI or T1 PRI modules or E1 channalized with miC R2 it could be possible to be supported on ASxxx by connecting 50 E1 channalised cards in multiple AS5xxx - about leased lines , you need a design based on three levels : the core layer the distribution layer and acces layer
it is not a good design to connect directly all the mleased lines to one equipement if you make a drawing it could be betteer "ashraf awadalla" a icrit dans le message : [EMAIL PROTECTED] > Hello everyone > I have an issue finding the correct Cisco equipment > solution for the following requirements: > > 1. Support for up to 1500 Dial Up Users > 2. Support for up to 500 Leased Lines. > > Can anyone suggest a Cisco solution please? I have > looked at the AS5xxx but was not able to conclude that > the above are supported and on what modules. > Thank you very much for your time in advance. > Regards > Ash > > __________________________________________________ > Do You Yahoo!? > Listen to your Yahoo! Mail messages from any phone. > http://phone.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24983&t=21660 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
