This is interesting but it still doesn't explain what it does. Here is a snippet from the 12.0 command summary for source-bridge:
Usage Guidelines The parser automatically displays the word "active" in the source-bridge command in configurations that have SRB enabled. You do not need to enter the source-bridge command with the active keyword. Well that clears that up, huh? Clear as mud.... John >>> "Michael Williams" 11/2/01 8:39:36 AM >>> Me neither.... but it is a legitimate command. Here's an URL with all kinds of information about configuring and troubleshooting DLSw http://www.cisco.com/warp/public/697/index.shtml I do see that command used in a sample config on this page, so check this one too (careful of wrap...... long URL) http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/8cbook/8cdlsw.htm HTH, Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25079&t=25036 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
