Oops, I misunderstood the question... what is the correct answer ?
> How is this command going to change the AS path list. The require task was > that R4 should see the loopback is from AS 200 not AS 100 (which is the > originator). > > Faisal > > > ""Wojtek Zlobicki"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > ""news"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hello, > > > > > > greetings... > > > While practicing for CCIE lab, I encounter a question that is something > > like > > > this > > > > > > Topology: > > > R1 ---- R3 ----- R4 > > > > > > R1 is on AS 100 > > > R3 is on AS 200 > > > R4 is on AS 500 > > > > > > There is a loopback address on R1 Loopback0 200.200.200.1/24. I am > > suppose > > > to advertise this through BGP. Now, in normal case, R4 should see this > > > network coming from AS 200 and then AS 500 > > > > > > My task is to configure R3 with one statement so that R4 see this > loopback > > > coming from AS 200 instead of AS 500? > > > Any idea how this is done? > > > > neighbor R3_LOOPBACK next-hop-self > > > > > > > > > > Thanks in advance. I appreciate your help. > > > > > > Faisal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25188&t=25130 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
