> > Decimal to Hex the value was still not an available option. I have being > > looking for this answer on the web and I found the following information at > > http://www.sitamoht.com/cciewe.html. > > > > Where to find the token ring number on the "show interface to 0" display > > > > a.. Look at the line that says "Source Bridging enabled, srn XX bn X trn > > XX" > > So as an example. lets say we do a "show int tok 0" at the enable prompt, > > and look at the line and you will see the following > > Source Bridging enabled, srn 10 bn 1 trn 20 > > > > The "trn" is the line stands for token ring number. And in that example > > the token ring number is 20 > >
trn stands for target ring number (the ring on the other side of the bridge indicated in bn) srn stands for source ring number (the ring number of the interface in decimal) > > > Source bridging enabled, srn 405 bn 1 trn 415 (ring group) > > > proxy explorers disabled, spanning explorer enabled, NetBIOS cache > > disabled > > > Group Address: 0x00000000, Functional Address: 0x0080011A > > > Ethernet Transit OUI: 0x0000F8 _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25887&t=25833 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
