Thank you very much.
Very clear.
-----Original Message-----
From: Blanco Lam [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 13, 2001 3:13 AM
To: [EMAIL PROTECTED]
Subject: RE: Question : Summarization - Routing [7:25923]
The reason for this null interface route is to prevent routing loops.
For example, let's say there are two ASes: AS1 and AS2
AS1 - 10.0.0.0/24;
10.0.1.0/24;
10.0.0.0/23 summary route advertising to AS2
default route pointing to AS2
AS2 - 20.0.0.0/24;
20.0.1.0/24;
20.0.0.0/23 summary route advertising to AS1
default route pointing to AS1
If you try and ping from AS2 to 10.0.1.1, it won't be a problem under
normal
circumstances. However, if 10.0.1.0 disappears for whatever reason
within
AS1, the following will happen:
- Packet from AS2 goes into AS1
- AS1 doesn't know anything about network 10.0.1.0 but.... AS1 has a
default route to AS2
- Packet gets forwarded back to AS2
- AS2 looks up its routing table and forwards it back to AS1
... and on and on.
With a null interface route in place, it will prevent the loop from
happening. If we take the scenario above, here's what will happen:
- Packet from AS2 goes into AS1
- AS1 doesn't know anything about network 10.0.1.0 but.... it can match
the
less specific "null interface route" (e.g. 10.0.0.0/8 --> null0)
- Packet goes into a black hole and error message generated back to
originating machine.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26031&t=25923
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
