Hi Larry, I'm not familiar with the PIX tool, but have worked with ConfigMaker a few times.
I do tech-support so see installs rolled out with config-maker configs sometimes, and most of them have some issue. Something was left out, or something wasn't quite right, etc. If they need/want to use ConfigMaker, view the generated config as a draft/template and not the final config. It needs to be reviewed by a knowledgable router/switch engineer to verify it is correct, has everything, doesn't have errors, etc. Erick --- Larry Johnson wrote: > I have client that will not take no for answer. > > He feels that the using ConfigMaker from Cisco is an > absolute must to > configure his routers and switches. > > I would appreciate your opinions about ConfigMaker > and the Pix firewall > graphic configuration utility that Cisco has also. > > Thank you in advance for your thoughts. > > LJ __________________________________________________ Do You Yahoo!? Find the one for you at Yahoo! Personals http://personals.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26082&t=26022 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
