* if u r doing nat outside to inside, is it normal behavior to get two
different nat addresses for the same source (in this case, 10.14.13.136)? i
know its going to 2 different destinations but shouldn't the source get the
same address?
ohdblndxnet-dr>sh ip nat tr ve
Pro Inside global Inside local Outside local
Outside global
--- 151.144.200.14 151.144.200.14 10.250.250.123
10.14.13.136
create 03:07:37, use 00:00:24, left 00:59:35, flags: outside
--- 151.144.200.15 151.144.200.15 10.250.250.50
10.14.13.136
create 01:25:59, use 00:31:07, left 00:28:52, flags: outside
* is there a debugging tool that will allow me to view the tcp 3-way
handshake? i know u can create an acl & debug it to view packets but can u
see the syn, syn ack & ack packets?
Timur Mirza
Principal Network Engineer
Network Transition Group
Irvine, California
Verizon Wireless
949.286.6623 (o)
949.697.7964 (c)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26305&t=26305
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
