Are you using a strait-thru or cross-over cable ? ------------------------------------------------------------------------ ------------------------------------------------------------------------ ----- Jay C Creasy Cisco Certified Network Professional + PIX Microsoft Certified Professional Inet Email [EMAIL PROTECTED] AIM ID HaltItAll Work # 713-548-3346 Home # 713-263-1939
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Kent Hawkins Sent: Thursday, November 15, 2001 4:29 AM To: [EMAIL PROTECTED] Subject: PIX line up protocol down [7:26349] Hi Guys I have a pix 520 that has 3 interfaces configured. Ethernet 1 and 2 are normal and have line up, protocol up. Ethernet 0 is down with line up , protocol down. There is a link light on both the Ethernet 0 interface and switch port. This is not a duplex issue since I have already set the Ethernet 0 interface to auto negotiate and back to 100full. Has anybody got any ideas?? _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26365&t=26349 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
