I have searched in the archives to no avail to find the answer to this question. The question has been asked many times, but no answer seems to have ever been given.
Can you granuarly filter SAP in NLSP? Either they are all there, or they are all gone? If I have the follwing SAPs: 4 File1 44.0.0.1 451 1 4 File2 44.0.0.1 451 1 4 File3 44.0.0.1 451 1 With IPX RIP or EIGRP I can use an access list such as: access-list 1000 deny -1 44.0.0.1 4 File1 access-list 1000 permit -1 and they apply it to the interface and File1 will disappear, but the other two will come through. With NLSP it dosen't work. They all come through still. I have tried input-sap-filter, distribute-sap-filter, under the routing process, anything I could think of but I can't make it remove just one of them. Any help would be great. Thanks. Bill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26447&t=26447 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
