Have you issued the SET VMPS STATE ENABLE command?? Have you got a TFTP Server for VMPS to get its Dynamic VLAN/MAC database records from? Have you specified the ports on the Switch to operate as dynamic mode for vlans??
I believe these commands are on all of the 4000, 5X00, and 6x00 Catalyst switches... but I could be wrong. To find out if these commands are available to you, just do a Set VMPS ? at the prompt. You'll probably get an example of how the command is used. HTH, Mark Odette II -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of king kaung Sent: Wednesday, November 21, 2001 9:05 AM To: [EMAIL PROTECTED] Subject: dynamic VLAN [7:27006] Hi All, After we migrate all our legacy 3Com Switches to Cisco switches, we found out that our current core switch Cat4006 does not support dynamic VLAN(according to vendors) but I check on the cisco website and I saw dynamic VLAN issued commands under Cat 4006. I also can not find these command sets under Cat4006 prompt. Using Static VLAN(per port VLAN) is very difficult to deploy in our environment.Is there any workaround to support dynamic VLAN features? Pls provide me any suggestion. I'm really appreciate your kind suggestion. Regards, Moe. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27035&t=27006 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
