Hi, You're going to need to use 802.1Q. This is from memory so may not be exactly correct. Don't have access to a 450 at moment.
On the 450, you configure the port to be a tagged port. You can do this through the console/telnet interface or through Device Manager (free download from Nortel). There should be some options to tell it what VLANs to put on trunk, but by default I believe its all. If you need help on Cisco side, feel free to ask. I'm presuming you have that side under control. Note: The Trunking feature on the 450 (MLT) is not VLAN trunking so don't get confused with those options. Also check this URL: http://www25.nortelnetworks.com/library/tpubs/pdf/switches/bstack/450/304935B.PDF HTH, Erick NNCSE, CCNP-Security --- Hamid wrote: > Hi group > In my network I have a CISCO 3600 Router and a > NORTEL Baystack 450 switch. > its a manageble switch. I want to make VLAN and a > make this switch VLANs > oprate as > routers's FastEthernet subinterfaces. > I have do it with CATALYST 2924 switches. I made > some VLANS and my router's > FastEthernet > port on switch use TRUNk protocol to route between > VLANS. > I want to use TRUNK protocol on Nortel switch but I > dont know how. > I asked the NORTEL support but they have not answer. > please help me. __________________________________________________ Do You Yahoo!? Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27261&t=27255 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
