Hope someone can help: Is it possible to upgrade my c1603 to IOS 12.x using the existing hardware? Do I need to upgrade the RAM? Thanks -Anil ------
rustyb#sh ver Cisco Internetwork Operating System Software IOS (tm) 1600 Software (C1600-Y-L), Version 11.1(12)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Copyright (c) 1986-1997 by cisco Systems, Inc. Compiled Mon 09-Jun-97 14:20 by krunyan Image text-base: 0x0801A214, data-base: 0x02005000 ROM: System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc 1) ROM: 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) rustyb uptime is 1 day, 21 minutes System restarted by power-on System image file is "flash:c1600-y-l.111-12.AA", booted via flash cisco 1603 (68360) processor (revision C) with 17920K/512K bytes of memory. Processor board ID 11324937 Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 1 ISDN Basic Rate interface. System/IO memory with parity disabled 2048K bytes of DRAM onboard 16384K bytes of DRAM on SIMM System running from FLASH 8K bytes of non-volatile configuration memory. 4096K bytes of processor board PCMCIA flash (Read ONLY) Configuration register is 0x2102 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27791&t=27791 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]