Hugo, If you are after some e.g. configs take a look at my earlier post in the GroupStudy ccielab archives. Posting 200111/msg01481.
Peter article , [EMAIL PROTECTED] writes >Peter, > >Thank you for replying. Great info that the IOS image should contain >"v5" feature set. ;-)) > >The box is an MC-3810 (not V or V3) with 32MB DRAM and 8MB flash with >mc3810-is-mz.120-5.XK image. > >ROM: System Bootstrap, Version 12.0(6r)T4, RELEASE SOFTWARE (fc1) >ROM: MC3810 Software (MC3810-WBOOT-M), Version 12.0(6r)T4, RELEASE >SOFTWARE (fc1) > >As fas I understood reading the notes at: > >this box will recognize a 64MB DRAM. > >Am I correct? > >TIA > > >-----Original Message----- >From: Peter Whittle [mailto:[EMAIL PROTECTED]] >Sent: sexta-feira, 30 de novembro de 2001 21:40 >To: [EMAIL PROTECTED] >Subject: Re: VoIP MC-3810 [7:27874] > > >The MC-3810 supports VoIP if you have a v5 variant of the IOS. > >eg enterprise + voatm + voip would be mc3810-a2jsv5_122-3.bin > >Of course you need a voice module, AVM (analogue), BVM (ISDN Bri), >DVM (ISDN Pri, CAS) and any load will do vofr. > > >However, VoIP loads require 64 Mbytes DRAM. > >If you upgrade an old mc-3810 or mc-3810v you need recent BOOTROMs, >take >a look in the release notes for details. If your bootroms are not >recent >enough then a 64Mb SIMM will only show up as 16 Mb! The bootroms are a >free of charge item. You will have to pay postage and may need to >order >them via a partner if you don't have SMARTNET on the routers. > >Peter > > > In article , [EMAIL PROTECTED] > writes >>Just to confirm. Can a MC-3810 do VoIP or only VoFR? >> >>Thanks, >> >>Hugo >>html >>Report misconduct and Nondisclosure violations to >[EMAIL PROTECTED] >> > -- Peter Whittle Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27911&t=27874 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
