not sure what an ip address has to do with LMI nor inverse arp as a map or interface dlci x will work just fine too. Thew bottom line is up and up on a frame circuit does not mean active PVC.
Dave Donald wrote: > > Yeah if you inverse arp and you change the ip address on one end, the > circuit will stay up, lmi will function, but you will not transfer data. > > ----- Original Message ----- > From: "MADMAN" > To: "Donald" > Cc: > Sent: Monday, December 03, 2001 2:36 PM > Subject: Re: Serial Line is up and line protocol is up ANSW [7:27930] > > > > > Yup, up and up, you got LMI between you and the switch not an active > > PVC. > > > > Dave > > > > Donald wrote: > > > > > > Not necessarily you can have a frame connection in an up/up state and > not > > > transfer data can't you. > > > > > > ----- Original Message ----- > > > From: "Gregg Malcolm" > > > To: > > > Sent: Sunday, December 02, 2001 12:01 PM > > > Subject: RE: Serial Line is up and line protocol is up ANSW [7:27930] > > > > > > > Anil, > > > > > > > > I'm sorry, my explaination wasn't very good. The answer can't be B > since > > > > you have no information saying data is being sent and received. The > > > answer > > > > A does fit since a frame relay connection is active if int status is > > > UP/UP. > > > > > > > > As far as the 2nd part, AFAIK not every encap uses keepalives. Frame > > > Relay > > > > is somewhat special in that an UP/UP status really means that data > COULD > > > be > > > > xfer'ed. The case of the broken remote CSU/DSU does not fit this > > > scenarios > > > > since keepalives would not be received. The question seems geared > toward > > > > trying to trick the engineer into thinking that data is being xfered > vs. > > > > could be. Many encap use keepalives. A few are F/R, ATM, PPP and > HDLC > > > (PPP > > > > uses an echo). Not sure if all do (probably not). Hope that helps. > > -- > > David Madland > > Sr. Network Engineer > > CCIE# 2016 > > Qwest Communications Int. Inc. > > [EMAIL PROTECTED] > > 612-664-3367 > > > > "Emotion should reflect reason not guide it" -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28063&t=27930 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
