You final conclusion is correct, you cannot using VLAN tunks between a catalyst & other Cisco switches. CCB wrote: > > I have a quick question about the Cisco 11000 series of content > switches, > does anyone know if the content switch is supposed to be able > to trunk a > link between the 11000 and a switch (5500,6500). The reason > why I am asking > is I have been working with a 11000 trying to setup a trunk > link to provide > our current VLAN's in the VTP domain to the content switch and > I am unable > to get the switch (Cat6509) to recognize the trunk link, when I > do a "show > trunk detail" on the switch it shows the port as trunking, but > it does not > recognize the trunk link. Both the Content Switch and the > Cat6509 are set > to use 802.1Q as the trunking type. I may be mislead but from > everything I > have tried I have come to the conclusion that the interface can > only be > trunked between two content switches and not a content switch > to a L2/L3 > switch. Any information would be helpful. > > Chris > >
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28181&t=28157 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
