2 C1603's connected to a hub. It should be simple but I cannot see why RIP does not update the routing tables (in either direction). I added secondary addresses to both routers e0, and want RIP to send these routes.
Any comments/suggestions welcome. Many thanks -Anil --------- rustya#sh ip route Gateway of last resort is not set C 193.9.200.0/24 is directly connected, Ethernet0 C 192.9.200.0/24 is directly connected, Ethernet0 rustya# ------------------------------ hostname rustya ! enable secret 5 $1$Ws8V$mRIwI97bc/Iv7PAEKFBVo1 ! ! interface Ethernet0 ip address 193.9.200.1 255.255.255.0 secondary ip address 192.9.200.1 255.255.255.0 ! interface BRI0 no ip address shutdown ! router rip network 193.9.200.0 ! no ip classless ! line con 0 line vty 0 4 password cisco login ! end -------------------------------- rustyb#sh ip route Gateway of last resort is not set C 192.9.200.0/24 is directly connected, Ethernet0 C 196.9.200.0/24 is directly connected, Ethernet0 rustyb# -------------------------------- hostname rustyb ! enable secret 5 $1$JycL$W4sNa8kuL2.tppX2IYQJU/ ! ! interface Ethernet0 ip address 196.9.200.1 255.255.255.0 secondary ip address 192.9.200.2 255.255.255.0 ! interface BRI0 no ip address shutdown ! router rip network 196.9.200.0 ! no ip classless ! line con 0 line vty 0 4 password cisco login ! end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28327&t=28327 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
