Chris, If your asking how your configure a PIX to allow DLSW to pass through it to a router beyond the PIX, just configure a static nat and conduit/access-list to allow the traffic the way you would any other inbound service. (DLSW uses TCP port 2065)
If your asking how you configure DLSW _on_ the PIX, the answer is you don't. The PIX IOS does not have DLSW as a feature. HTH, Kent -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of chris fong Sent: Thursday, December 13, 2001 10:21 PM To: [EMAIL PROTECTED] Subject: DLSW on PIX515 [7:29170] Does anyone have any links on configuring DLSW on a PIX firewall with IOS 6.1 and running NAT? I tried Cisco's website and couldn't find any. Thanks. __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29201&t=29170 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
