Looks close. Four steps needed 1.ip address to routable interface ok
2.a route table or default route must be established to direct return path Telnet traffic ok 3. line configuration of vty password must be performed. r2509(config)#line vty 04 r2509(config-line)#login r2509(config-line)#password cisco not ok 4.an enable password must be applied ok Good luck Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29352&t=29341 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
