Sean, Try 2 things. do a show users and see if you have already tied up that line. If so do a clear line (then the number). If that doesn't work you might have to do a stop bits=1 on your terminal line as sometimes the default is 1.5 stop bits.
-----Original Message----- From: slloyd [mailto:[EMAIL PROTECTED]] Sent: 16 December 2001 21:07 To: [EMAIL PROTECTED] Subject: Re: 2509 connect fail Debug [7:29349] Here's the Debug of my 2509 connection problem R2509#telnet 10.1.1.1 2001 Trying 10.1.1.1, 2001 ... % Connection refused by remote host R2509# 06:02:47: TCB000C97C4 created 06:02:47: TCB000C97C4 setting property TCP_TOS (11) 1F2F7B 06:02:47: TCB000C97C4 bound to UNKNOWN.11035 06:02:47: TCP: sending SYN, seq 1297459931, ack 0 06:02:47: TCP0: Connection to 10.1.1.1:2001, advertising MSS 1474 06:02:47: tcp0: O CLOSED 10.1.1.1:2001 10.1.1.1:11035 seq 1297459931 OPTS 4 SYN WIN 4128 06:02:47: IP: s=10.1.1.1 (local), d=10.1.1.1 (Loopback0), len 44, sending 06:02:47: TCP0: state was CLOSED -> SYNSENT [11035 -> 10.1.1.1(2001)] 06:02:47: IP: s=10.1.1.1 (Loopback0), d=10.1.1.1 (Loopback0), len 44, rcvd 3 06:02:47: tcp0: I LISTEN 10.1.1.1:11035 10.1.1.1:2001 seq 1297459931 OPTS 4 SYN WIN 4128 06:02:47: TCP: connection attempt to port 2001 06:02:47: TCP: sending RST, seq 0, ack 1297459932 06:02:47: TCP: sent RST to 10.1.1.1:11035 from 10.1.1.1:2001 06:02:47: IP: s=10.1.1.1 (local), d=10.1.1.1 (Loopback0), len 40, sending 06:02:47: IP: s=10.1.1.1 (Loopback0), d=10.1.1.1 (Loopback0), len 40, rcvd 3 06:02:47: tcp0: I SYNSENT 10.1.1.1:2001 10.1.1.1:11035 seq 0 ACK 1297459932 RST WIN 0 06:02:47: TCP0: state was SYNSENT -> CLOSED [11035 -> 10.1.1.1(2001)] 06:02:47: TCP0: bad seg from 10.1.1.1 -- closing connection: seq 0 ack 129745993 2 rcvnxt 0 rcvwnd 0 06:02:47: TCP0: connection closed - remote sent RST 06:02:47: TCB 0xC97C4 destroyed IP arp mobility: aging arp mobility cache entries [Resuming connection 1 to 10.1.1.1 ... ] 06:03:01: TTY0: pause timer type 1 (OK) 06:03:01: tcp0: O ESTAB 10.1.1.1:2001 10.1.1.1:11034 seq 1270605017 ACK 1270609385 WIN 4128 06:03:01: IP: s=10.1.1.1 (local), d=10.1.1.1 (Loopback0), len 40, sending 06:03:01: IP: s=10.1.1.1 (Loopback0), d=10.1.1.1 (Loopback0), len 40, rcvd 3 06:03:01: tcp1: I ESTAB 10.1.1.1:11034 10.1.1.1:2001 seq 1270605017 ACK 1270609385 WIN 4128 R2509# 06:03:05: tcp0: O ESTAB 10.1.1.1:2001 10.1.1.1:11034 seq 1270605017 ACK 1270609385 WIN 4128 06:03:05: IP: s=10.1.1.1 (local), d=10.1.1.1 (Loopback0), len 40, sending 06:03:05: TTY0: resume timer type 1 (OK) 06:03:05: TTY0: destroy timer type 4 06:03:05: IP: s=10.1.1.1 (Loopback0), d=10.1.1.1 (Loopback0), len 40, rcvd 3 06:03:05: tcp1: I ESTAB 10.1.1.1:11034 10.1.1.1:2001 seq 1270605017 ACK 1270609385 WIN 4128und all ----- Original Message ----- From: "shawn lloyd" To: Sent: Sunday, December 16, 2001 1:27 PM Subject: Re: 2509 configuration [7:29343] > ----- Original Message ----- > Hi > > I'm configuring a 2509 terminal server for my home lab. The octal cable is > connected to the console ports of my 5 routers. But when I try to establish a > telnet connection I receive the following : > R2509#telnet 10.1.1.1 2001 > Trying 10.1.1.1, 2001 ... Open > > But nothing else happens. I'm not able to log into the router. > THe configuration of the terminal server is > > ! > service udp-small-servers > service tcp-small-servers > ! > hostname R2509 > ! > enable secret cisco > ! > no ip domain-lookup > ! > ip host r1-2501 2001 10.1.1.1 > ip host r2-2501 2002 10.1.1.1 > ip host r3-2501 2003 10.1.1.1 > ip host r4-2502 2004 10.1.1.1 > ip host r5-2523 2005 10.1.1.1 > ! > interface Loopback0 > ip address 10.1.1.1 255.255.255.255 > ! > ip classless > ! > line con 0 > ! > line 1 8 > transport input all > no exec > line aux 0 > line vty 0 4 > login > ! > end > ============================================ > Router 1 configuration > R1-2501#sh run > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname R1-2501 > ! > ! > ip subnet-zero > ! > ! > ! > interface Loopback0 > ip address 1.1.1.2 255.0.0.0 > no ip directed-broadcast > ! > interface Ethernet0 > no ip address > no ip directed-broadcast > shutdown > ! > interface Serial0 > no ip address > no ip directed-broadcast > no ip mroute-cache > shutdown > no fair-queue > ! > interface Serial1 > no ip address > no ip directed-broadcast > shutdown > ! > ip classless > ! > ! > line con 0 > transport input none > line aux 0 > line vty 0 4 > login > ! > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29382&t=29349 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
