You are talking about XOT. X.25 over TCP. Try here: http://www.cisco.com/warp/public/116/x25_pad_xot.html
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of amarjeet singh Sent: Tuesday, December 18, 2001 1:25 AM To: [EMAIL PROTECTED] Subject: X.28 to ip conversion [7:29456] Dear Group, I have a requirement which is mentioned below:- The link is like this.. .. Kiosk ------>R1--->Modem ....> IP cloud.--->IP host The kiosk has got a RS232 port which is connected to my router (R1) Ethernet port (via RS232 to RJ45 cable). On the serial interface of router modem is connected & it is dialing to an IP network & reaching to a host which runs on IP. The kiosk is sending me X.28 packets from its RS232 port to my Ethernet port of R1. My question is how do I make conversion from X.28 to IP so that my Ethernet port will understand. Finally these packets will be sent to the IP host in IP format only. Or what solution do I implement for the same. Earlier I tried with serial to IP converter hardware device (between kiosk & R1) Now I want to do it without this hardware. Any suggestions... Thanx in Advance.. Sonu Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29485&t=29456 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
