Hi Guys I am setting up a Cisco 3660 with remote dialling access for ISDN & PSTN users(30 Digital Modem Module & Pri Module installed), everything seems ok, however when a ISDN User dials in to the 3660 after approx 160- 180 seconds the user gets kicked out of the 3660(The user is typing at the time so there was activity). I have whipped up the idle timeout to 3 hours but the same thing happens.Below is a copy of part of the config, Is there anything I am ommitting please let me know. Thanks Simon encapsulation ppp timeout absolute 3 0 dialer rotary-group 0 isdn switch-type primary-net5 isdn incoming-voice modem peer default ip address pool dialin_pool ppp authentication ms-chap ! interface Group-Async1 ip unnumbered Loopback0 encapsulation ppp dialer in-band dialer-group 1 async dynamic routing async mode interactive peer default ip address pool dialin_pool ppp authentication ms-chap dial_in group-range 33 62 ! interface Dialer0 ip unnumbered Loopback0 encapsulation ppp dialer in-band dialer idle-timeout 10800 dialer-group 1 peer default ip address pool dialin_pool ppp authentication ms-chap dial_in ! interface Dialer1 ip unnumbered Loopback1
------------------------------------------------------------------------ Join the worlds largest e-mail service with MSN Hotmail. Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29521&t=29521 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
