And I missed looking at the wild card masks. I assume you meant only change the mask on the 216.252.243.0 net. The mask for the 64.110.93.192 /28 appears correct. (It's time for my holiday vacation!)
Prof. Tom Lisa, CCAI Community College of Southern Nevada Cisco Regional Networking Academy Gaz wrote: > Good point Tom - just finishing my post when I saw yours and I'd totally > missed it. > > kaushalender > > I take it that this is maybe a typo, but your wildcard mask should be > 0.0.0.255 > 0.0.0.225 will give you a strange array of addresses allowed through. > > So three changes: > > Make the line: ip access-group 101 in (two changes) > > Make the wildcard mask 0.0.0.255 > > Regards, > > Gaz > > ""Tom Lisa"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Might also try changing the number of the access-group to match the > > access-list number, 101. > > > > Prof. Tom Lisa, CCAI > > Community College of Southern Nevada > > Cisco Regional Networking Academy > > > > Router Man wrote: > > > > > Try changing you access-group command to: > > > > > > "ip access-group 103 in" > > > > > > Let me know if this helps > > > > > > ""kaushalender"" wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > hi , > > > > all i want to make accesslist on inboud traffic on ethernet .Iwant > that > > > > traffic of 64.110.93.192/28 and 216.252.243.0/24 should be allowed > rest > > > will > > > > be dinied . I have tried this > > > > > > > > access-list 101 permit ip 64.110.93.192 0.0.0.15 any > > > > access-list 101 permit ip 216.252.243.0 0.0.0.225 any > > > > > > > > but didnt worked plz help me i giving the detail of int e0/0 > > > > > > > > > > > > interface Ethernet0/0 > > > > ip address 10.101.3.48 255.255.252.0 secondary > > > > ip address 216.252.243.161 255.255.255.240 secondary > > > > ip address 216.252.243.1 255.255.255.252 secondary > > > > ip address 64.110.93.194 255.255.255.240 > > > > ip access-group 103 out > > > > full-duplex > > > > > > > > thanx > > > > regards > > > > kaushalender Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29569&t=29468 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
