I can do full-duplex on a 10Mbs port on a Catalyst 5000. Here's an example. Module 2 has 10/100 ports. Module 4 has only 10 Mbs ports. Right5K> (enable) set port speed 2/1 10 Port(s) 2/1 speed set to 10Mbps. Right5K> (enable) set port duplex 2/1 full Port(s) 2/1 set to full-duplex. Right5K> (enable) set port duplex 4/1 full Port(s) 4/1 set to full-duplex. Right5K> (enable) sh port 2/1 Port Name Status Vlan Level Duplex Speed Type ----- ------------------ ---------- ---------- ------ ------ ----- ------------ 2/1 notconnect 1 normal full 10 10/100BaseTX Right5K> (enable) sh port 4/1 Port Name Status Vlan Level Duplex Speed Type ----- ------------------ ---------- ---------- ------ ------ ----- ------------ 4/1 notconnect 1 normal full 10 10BaseT
> -----Original Message----- > From: Donny Mateo [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, December 19, 2001 9:46 PM > To: [EMAIL PROTECTED] > Subject: Re: Catalyst port [7:29718] > > > Forgive me if I'm wrong..but isn't Ethernet not supposed to > support full > duplex ? > I thought Full duplex can only be supported by Fast Ethernet > interface ? > > Donny > > > >From: "Darrell Newcomb" > >Reply-To: "Darrell Newcomb" > >To: [EMAIL PROTECTED] > >Subject: Re: Catalyst port [7:29718] > >Date: Wed, 19 Dec 2001 20:56:38 -0500 > > > >Woops in CatOS that's set port duplex 5/1 full > > > >Darrell Newcomb wrote: > > > > > > set port duplex full > > > > > > IOS(interface config mode): > > > duplex full > > > > > > Christian Fredrickson wrote: > > > > > > > > What is the command to force an Ethernet port on a > Catalyst to Full > >Duplex? > > > > Thanks > _________________________________________________________________ > Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29740&t=29718 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
