I'm testing out a 2926T I recently bought for my lab at my house. The 24 10/100 ports seem ok. I have tried plugging devices into the 2 100Mbps uplink ports, but I get a continuous repeating error about every 2-3 seconds. 2001 Dec 24 12:01:23 %PAGP-3-CONFPORTCHNLFAIL:Failure = -1 in configPortChannel for mNo/pNo = 1/1 when I plug in the other port, it says port 1/2
I have tried another generic switch and a PC. I have "set clear all" to erase the NVRAM of the switch to get it back to factory config. This is the first 5000 platform switch I have purchased and logged into, maybe I am confused about the use of the uplink ports. Are they *only* uplinks to another cisco ISL switch? I have searched Cisco.com, and most search engines. It is documented at Cisco, and they recommend that you contact your "Technical Support Rep" about this problem. Another behavior I noticed, When I transmit data over the switch (computer to computer), there is a slight buzzing noise. It immediately stops when I abort a file transfer. Is this normal? Thank you for any help. -Jason Barbee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30034&t=30034 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
