>From cisco.com Port Aggregation Protocol/EtherChannel Messages This section contains the switch Port Aggregation Protocol (PAgP) and EtherChannel messages.
PAGP-3-CONFPORTCHNLFAIL: Failure = [dec] in configPortChannel for mNo/pNo = [dec]/[dec] Explanation This message indicates that the system was unable to configure the channel properly; [dec] is the return status, and [dec]/[dec] is the module number/port number. Recommended Action Try to reset the failing ports. If the message reappears, contact your technical support representative. --- Barbee Jason wrote: > The buzzing noise was one of the power supplies, I > switched to the second > RPS and the sound is much less, but I can still hear > a slight buzzing noise > during acitivity. > Both uplink ports work when connected to a device. I > can transmit data > between computers. > On the console I get the message referenced about > every 3 seconds output to > the console. > 2001 Dec 24 12:48:04 > %PAGP-3-CONFPORTCHNLFAIL:Failure = -1 in > configPortChannel for mNo/pNo = 1/2 > -Jason [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30040&t=30034 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
