John,
What if you create subinterfaces, connect your isp link to a hub and your
router the same hub....
JB
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Mairs
Sent: Saturday, December 29, 2001 10:03 PM
To: [EMAIL PROTECTED]
Subject: setting up NPAT using only one ethernet interface (2501)
[7:30454]
Hi,
can I, if so, how would I go about setting up NPAT on
my 2501's only ethernet port. I am confused as to how
my router will be able to distinguish inside/outside
NAT on the primary/secondary interfaces.
Essentially I would like to now how to configure the
router to do this with a rudimentary explanation what
is happening.
I can find thousands of descriptions of how to set up
NAT but none of them show how to do this over a single
LAN interface.
Any thoughts would be greatly appreciated.
Thanks for your time,
John
__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=30458&t=30458
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
