Hi All,
Im facing one problem on our central site i.e
currently im using
Cisco
3640 router with fast ethernet module in it, its
working perfect,
but
when i change the module i.e 1E2W & no shuts the
ethernet
interface
it, then the following scenario occurs!
Router(config-if)#
Router(config-if)#no shut
Router(config-if)#
%AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive
collisions, TDR=1,
TRC=0.
%LINEPROTO-5-UPDOWN: Line protocol on Interface
Ethernet0/0,
changed
state to up
%LINK-3-UPDOWN: Interface Ethernet0/0, changed
state to up
Router(config-if)#ip address 10.1.0.1 255.255.0.0
Router(config-if)#
%AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive
collisions, TDR=1,
TRC=0.
%AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive
collisions, TDR=1,
TRC=0.
%AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive
collisions, TDR=1,
TRC=0.
Ethernet doesnt work properly! Excessive
collisions occurs! but
the
same module is working alright on our brach
office.
Any Suggestions? Need solution urgently.
Rgds,
SAJ
__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
X-Apparently-To: [EMAIL PROTECTED] via web20908.mail.yahoo.com; 01
Jan 2002 02:49:24 -0800 (PST)
X-Track: 1: 40
Received: from 202.163.99.184 (EHLO company.mail) (202.163.99.184) by
mta442.mail.yahoo.com with SMTP; 01 Jan 2002 02:49:23 -0800 (PST)
Received: from gacpak.com [10.1.0.10] by company.mail [10.1.1.157] with
SMTP (MDaemon.PRO.v5.0.1.T) for ; Tue, 01 Jan
2002 15:49:00 +0500
Received: from ccMail by gacpak.com (ccMail Link to SMTP R8.30.00.7) id
A1009928999; Tue, 01 Jan 2002 15:50:08 +0500
X-Mailer: ccMail Link to SMTP R8.30.00.7
Date: Tue, 01 Jan 2002 15:51:46 +0500
From:
To: ,
Subject: %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Description: "cc:Mail Note Part"
X-MDRemoteIP: 10.1.0.10
X-Return-Path: [EMAIL PROTECTED]
X-MDaemon-Deliver-To: [EMAIL PROTECTED]
Content-Length: 474
Hi All,
Im facing one problem on our central site i.e currently im using Cisco
3640 router with fast ethernet module in it, its working perfect, but
when i change the module i.e 1E2W & no shuts the ethernet interface
it, then the following scenario occurs!
Router(config-if)#
Router(config-if)#no shut
Router(config-if)#
%AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1, TRC=0.
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed
state to up
%LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
Router(config-if)#ip address 10.1.0.1 255.255.0.0
Router(config-if)#
%AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1, TRC=0.
%AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1, TRC=0.
%AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1, TRC=0.
Ethernet doesnt work properly! Excessive collisions occurs! but the
same module is working alright on our brach office.
Any Suggestions? Need solution urgently.
Rgds,
SAJ
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=30642&t=30642
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
