It means the baud rate to was set to 38400 bps the other end to which it is connected to - either a PC configured using Hyperterminal or a Terminal server.
Let me know if you need anything. Thanks Rajesh "Kaminski, Shawn G" wrote: > I was working on a 2611 router and noticed that the configuration register > was set to 0x3962 !!! I tried to change it to 0x2102 but says it will change > to 0x3922 at the next reload. Just curious if anyone has seen this before > and what it means. When I looked at CCO I noticed that they didn't have any > information on 0x3000, only 0x1000, 0x2000, 0x4000, and 0x8000. > > Shawn K. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30718&t=30713 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
