You are correct. That book, while good, is littered with typos and this is definitely one of them. If your mask were 0x0000, then it would only match 0x0d0d exactly. Check out the following webpage for a great explanation:
http://www.cisco.com/warp/public/698/acl200.html HTH, John ________________________________________________ Get your own "800" number Voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag ---- On Thu, 3 Jan 2002, William Lijewski ([EMAIL PROTECTED]) wrote: > Could someone please tell me the correct way to permit just SNA. I have > read many places that the correct access list to permit just SNA is : > > access-list 200 permit 0x0000 0x0D0D > > I just received the Cisco Practical Studies book and it shows it as > follows: > > access-list 200 permit 0x0D0D 0x0000 > > Which way is correct?! > > Thanks [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30888&t=30886 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
