Sorry I mispoke.  Inteface s1 is shutdown.
""Gaz""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Are any of the interfaces up?
>
> If they're down, the routes won't appear (by default)
>
> Gaz
>
>
> ""Stephane Wantou Siantou""  wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi guys,
> > I configured two cisco routers.  One is an AS 2509 (RouterA) and the
other
> > is a 2503 (RouterB).  When I do a "sh ip route" I do not see the ip
> > addresses of the interfaces directly connected to the routers.  Can
> > anybody help me with that?  Here is the result of the "sh ip route"
> command
> > on RouterA and RouterB, followed by the configurations of both routers.
> >
> > RouterA#sh ip route
> > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> >        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> >        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> >        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> >        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
> > default
> >        U - per-user static route, o - ODR
> >
> > Gateway of last resort is not set
> >
> > RouterB#sh ip route
> > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> >        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> >        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> >        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> >        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS
inter
> > area
> >        * - candidate default, U - per-user static route, o - ODR
> >        P - periodic downloaded static route
> >
> > Gateway of last resort is not set
> >
> > RouterA#sh star
> > Using 971 out of 32762 bytes
> > version 12.0
> > service config
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > hostname RouterA
> > enable secret 5 $1$nCDS$RTo6p39TeTeAXSL/nrbn00
> > enable password password
> > ip subnet-zero
> > interface Ethernet0
> >  description LAN link to Sales 172.16.10.0 255.255.255.0
> >  ip address 172.16.10.1 255.255.255.0
> >  no ip directed-broadcast
> > interface Serial0
> > description WAN Link to SF
> >  ip address 172.16.20.1 255.255.255.0
> >  no ip directed-broadcast
> >  no ip mroute-cache
> >  no fair-queue
> > interface Serial1
> >  ip address 172.15.60.1 255.255.255.0
> >  no ip directed-broadcast
> >  no cdp enable
> > ip classless
> > ip route 172.16.30.0 255.255.255.0 172.16.20.2
> > ip route 172.16.40.0 255.255.255.0 172.16.20.2
> > ip route 172.16.50.0 255.255.255.0 172.16.20.2
> > dialer-list 1 protocol ip permit
> > dialer-list 1 protocol ipx permit
> > line con 0
> >  exec-timeout 0 0
> >  transport input none
> > line 1 8
> > line aux 0
> > line vty 0 4
> >  password password2
> >  login
> > end
> >
> > RouterB#sh star
> > Using 986 out of 32762 bytes
> > version 12.1
> > no service single-slot-reload-enable
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > hostname RouterB
> > logging rate-limit console 10 except errors
> > enable secret 5 $1$6GQN$5msR8qh8ViZb5cyAb4cXd/
> > enable password password
> > ip subnet-zero
> > no ip finger
> > cns event-service server
> > interface Ethernet0
> >  ip address 172.16.30.1 255.255.255.0
> >  no cdp enable
> >  no mop enabled
> > interface Serial0
> >  ip address 172.16.20.2 255.255.255.0
> > interface Serial1
> >  bandwidth 56
> >  no ip address
> >  shutdown
> >  clockrate 56000
> >  no cdp enable
> > interface BRI0
> >  no ip address
> >  shutdown
> >  no cdp enable
> > ip kerberos source-interface any
> > ip classless
> > ip route 172.16.10.0 255.255.255.0 172.16.20.1
> > ip route 172.16.50.0 255.255.255.0 172.16.40.2
> > no ip http server
> > dialer-list 1 protocol ip permit
> > dialer-list 1 protocol ipx permit
> > line con 0
> >  exec-timeout 0 0
> >  transport input none
> > line aux 0
> > line vty 0 4
> >  password password2
> >  login
> > end
> >
> > Thanks,




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31094&t=31085
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to