The problem is not that command the problem is related to layer 2 and is solved in 2 ways. 1 decreasing the speed to 9600 2 or change the ios to 12.09
best regards, ""Paul Werner"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > As previously mentioned in another post, your shared secret is > not the same on both username/password combinations for both > routers. As you indicated, you had a copy/paste error and I do > not necessarily believe that is the root of the problem, > because your debugs (which appears to be "debug ppp neg" or > possibly "debug ppp auth" does not explicitly indicate a CHAP > failure. It would be clearly indicated. There appears to be > other issues at work. > > One of the first things that caught my eye was why you set the > interfaces to unnumbered, but pointed them to different IP > networks, namely 192.168.3.1/32 and 192.168.2.1/32. Just out > of curiosity, why not place the interfaces on the same IP > subnet, such as 192.168.2.1/30 and 192.168.2.2/30 for the other > side? That is still not going to cause the problem you have, > because your debug seems to indicate you are not getting past > layer 2. I was also curious as to why only one side of this > backup link was allowed to detect and initiate failure? > Specifically, you have a dialer map statement from Ney York to > Albany, but you have no dialer map statement from Albany to new > York? Was this intentional? > > I also noticed that you have indicated the intent was to use > the AUX ports for a dial backup solution (I assume in the event > that the frame relay circuit goes down between the two > locations). What is not clear looking at the configs is how > this will be accomplished without the use of the backup > interface command or dialer profiles (which is probably better). > > Additionally, I do not see how packets sourced from the > Ethernet interface on either router will have a path to the > other ethernet interface on the far side router. You do not > appear to have enough routes on each routers' static route > statements to make it all work. Still, this is not causing the > problem you have. > > My bet is that the problem you are having is related to this > command here: > > ppp authentication chap callin > > You may want to read this link (watch wrap) to understand why > that command may not be necessarily appropriate for what you > are trying to do: > > http://www.cisco.com/warp/public/131/ppp_callin_hostname.html > > HTH, > > Paul Werner > > > Hi all, > > > > I am configuring 2 router from their aux ports (but not back > to back) > > with > > usr modems. I have configured the aux ports like they will > act as back > > up > > ports. Everything is normal till it comes to ppp > authentication session. > > I > > am pasting the configs and also after I tried my configs but > they didnt > > work > > so I found a config from cisco and tried that one but it > didn't worked > > too. > > > http://www.cisco.com/warp/public/793/access_dial/async_backup_14 > 281.html > > > > Software versions are 12.1 (10), Any help willl be > appreciated. > > > > Best regards, > > > > > > newyork#sh run > > Building configuration... > > > > Current configuration : 1368 bytes > > ! > > version 12.1 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname newyork > > ! > > ! > > username albany password 0 cisco > > ! > > ! > > ! > > ! > > memory-size iomem 25 > > ip subnet-zero > > ! > > chat-script backup "" "atdt\T" TIMEOUT 60 CONNECT \c > > ! > > ! > > voice-port 1/0 > > ! > > voice-port 1/1 > > ! > > voice-port 2/0 > > ! > > voice-port 2/1 > > ! > > ! > > ! > > ! > > interface Loopback0 > > ip address 192.168.3.1 255.255.255.255 > > ! > > interface Serial0 > > no ip address > > encapsulation frame-relay > > no fair-queue > > ! > > interface Serial0.1 point-to-point > > ip address 192.168.1.3 255.255.255.0 > > frame-relay interface-dlci 16 > > ! > > interface Serial1 > > no ip address > > shutdown > > ! > > interface FastEthernet0 > > ip address 10.1.3.1 255.255.255.0 > > speed auto > > ! > > interface Async5 > > ip unnumbered Loopback0 > > encapsulation ppp > > dialer in-band > > dialer idle-timeout 3600 > > dialer fast-idle 10 > > dialer enable-timeout 10 > > dialer map ip 192.168.2.1 name albany modem-script backup 250 > > dialer-group 1 > > async mode dedicated > > no peer default ip address > > ppp authentication chap callin > > ! > > ip classless > > ip route 192.168.2.1 255.255.255.255 Serial0 > > ip route 192.168.2.1 255.255.255.255 Async5 2 > > no ip http server > > ! > > dialer-list 1 protocol ip permit > > ! > > line con 0 > > line aux 0 > > exec-timeout 0 0 > > script dialer backup > > modem InOut > > transport input all > > stopbits 1 > > speed 38400 > > flowcontrol hardware > > line vty 0 4 > > login > > ! > > no scheduler allocate > > end > > > > > > here is the config and debug for albany router > > > > albany#sh run > > Building configuration... > > > > Current configuration : 1031 bytes > > ! > > version 12.1 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname albany > > ! > > username newyork password 0 cspm > > ! > > ! > > ! > > ! > > memory-size iomem 25 > > ip subnet-zero > > no ip domain-lookup > > ! > > ! > > ! > > voice-port 2/0 > > ! > > voice-port 2/1 > > ! > > ! > > ! > > ! > > interface Loopback0 > > ip address 192.168.2.1 255.255.255.255 > > ! > > interface Serial0 > > no ip address > > encapsulation frame-relay > > ! > > interface Serial0.1 multipoint > > ip address 192.168.1.1 255.255.255.0 > > frame-relay interface-dlci 16 > > ! > > interface FastEthernet0 > > ip address 10.1.1.1 255.255.255.0 > > speed auto > > ! > > interface Async5 > > ip unnumbered Loopback0 > > encapsulation ppp > > dialer in-band > > dialer-group 1 > > async mode dedicated > > no peer default ip address > > ppp authentication chap > > ! > > ip classless > > ip route 192.168.3.1 255.255.255.255 Async5 2 > > ip route 192.168.3.1 255.255.255.255 Serial0 2 > > no ip http server > > ! > > dialer-list 1 protocol ip permit > > ! > > line con 0 > > line aux 0 > > modem InOut > > transport input all > > stopbits 1 > > speed 38400 > > flowcontrol hardware > > line vty 0 4 > > login > > ! > > end > > > > > > 00:38:27: %LINK-3-UPDOWN: Interface Async5, changed state to > up > > 00:38:27: As5 PPP: Treating connection as a callin > > 00:38:27: As5 PPP: Phase is ESTABLISHING, Passive Open > > 00:38:27: As5 LCP: State is Listen > > 00:38:29: As5 LCP: TIMEout: State Listen > > 00:38:29: As5 LCP: O CONFREQ [Listen] id 41 len 25 > > 00:38:29: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:29: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:29: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:29: As5 LCP: PFC (0x0702) > > 00:38:29: As5 LCP: ACFC (0x0802) > > 00:38:31: As5 LCP: TIMEout: State REQsent > > 00:38:31: As5 LCP: O CONFREQ [REQsent] id 42 len 25 > > 00:38:31: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:31: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:31: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:31: As5 LCP: PFC (0x0702) > > 00:38:31: As5 LCP: ACFC (0x0802) > > 00:38:33: As5 LCP: TIMEout: State REQsent > > 00:38:33: As5 LCP: O CONFREQ [REQsent] id 43 len 25 > > 00:38:33: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:33: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:33: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:33: As5 LCP: PFC (0x0702) > > 00:38:33: As5 LCP: ACFC (0x0802) > > 00:38:35: As5 LCP: TIMEout: State REQsent > > 00:38:35: As5 LCP: O CONFREQ [REQsent] id 44 len 25 > > 00:38:35: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:35: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:35: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:35: As5 LCP: PFC (0x0702) > > 00:38:35: As5 LCP: ACFC (0x0802) > > 00:38:37: As5 LCP: TIMEout: State REQsent > > 00:38:37: As5 LCP: O CONFREQ [REQsent] id 45 len 25 > > 00:38:37: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:37: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:37: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:37: As5 LCP: PFC (0x0702) > > 00:38:37: As5 LCP: ACFC (0x0802) > > 00:38:39: As5 LCP: TIMEout: State REQsent > > 00:38:39: As5 LCP: O CONFREQ [REQsent] id 46 len 25 > > 00:38:39: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:39: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:39: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:39: As5 LCP: PFC (0x0702) > > 00:38:39: As5 LCP: ACFC (0x0802) > > 00:38:41: As5 LCP: TIMEout: State REQsent > > 00:38:41: As5 LCP: O CONFREQ [REQsent] id 47 len 25 > > 00:38:41: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:41: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:41: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:41: As5 LCP: PFC (0x0702) > > 00:38:41: As5 LCP: ACFC (0x0802) > > 00:38:43: As5 LCP: TIMEout: State REQsent > > 00:38:43: As5 LCP: O CONFREQ [REQsent] id 48 len 25 > > 00:38:43: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:43: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:43: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:43: As5 LCP: PFC (0x0702) > > 00:38:43: As5 LCP: ACFC (0x0802) > > 00:38:45: As5 LCP: TIMEout: State REQsent > > 00:38:45: As5 LCP: O CONFREQ [REQsent] id 49 len 25 > > 00:38:45: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:45: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:45: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:45: As5 LCP: PFC (0x0702) > > 00:38:45: As5 LCP: ACFC (0x0802) > > 00:38:47: As5 LCP: TIMEout: State REQsent > > 00:38:47: As5 LCP: O CONFREQ [REQsent] id 50 len 25 > > 00:38:47: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 00:38:47: As5 LCP: AuthProto CHAP (0x0305C22305) > > 00:38:47: As5 LCP: MagicNumber 0x0731DE4D (0x05060731DE4D) > > 00:38:47: As5 LCP: PFC (0x0702) > > 00:38:47: As5 LCP: ACFC (0x0802) > > 00:38:49: As5 LCP: TIMEout: State REQsent > > 00:38:49: As5 LCP: State is Listen > > 00:38:50: %LINK-5-CHANGED: Interface Async5, changed state to > reset > > 00:38:50: As5 LCP: State is Closed > > 00:38:50: As5 PPP: Phase is DOWN > > 00:38:55: %LINK-3-UPDOWN: Interface Async5, changed state to > down > > 00:38:55: As5 LCP: State is Closed > > > > here is the debug for newyork router > > > > 01:09:20: As5 IPCP: Install route to 192.168.2.1 > > 01:09:22: %LINK-3-UPDOWN: Interface Async5, changed state to > up > > 01:09:22: As5 PPP: Treating connection as a callout > > 01:09:22: As5 PPP: Phase is ESTABLISHING, Active Open > > 01:09:22: As5 PPP: No remote authentication for call-out > > 01:09:22: As5 LCP: O CONFREQ [Closed] id 51 len 20 > > 01:09:22: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:22: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:22: As5 LCP: PFC (0x0702) > > 01:09:22: As5 LCP: ACFC (0x0802) > > 01:09:24: As5 LCP: TIMEout: State REQsent > > 01:09:24: As5 LCP: O CONFREQ [REQsent] id 52 len 20 > > 01:09:24: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:24: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:24: As5 LCP: PFC (0x0702) > > 01:09:24: As5 LCP: ACFC (0x0802) > > 01:09:26: As5 LCP: TIMEout: State REQsent > > 01:09:26: As5 LCP: O CONFREQ [REQsent] id 53 len 20 > > 01:09:26: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:26: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:26: As5 LCP: PFC (0x0702) > > 01:09:26: As5 LCP: ACFC (0x0802) > > 01:09:28: As5 LCP: TIMEout: State REQsent > > 01:09:28: As5 LCP: O CONFREQ [REQsent] id 54 len 20 > > 01:09:28: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:28: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:28: As5 LCP: PFC (0x0702) > > 01:09:28: As5 LCP: ACFC (0x0802) > > 01:09:30: As5 LCP: TIMEout: State REQsent > > 01:09:30: As5 LCP: O CONFREQ [REQsent] id 55 len 20 > > 01:09:30: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:30: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:30: As5 LCP: PFC (0x0702) > > 01:09:30: As5 LCP: ACFC (0x0802) > > 01:09:32: As5 LCP: TIMEout: State REQsent > > 01:09:32: As5 LCP: O CONFREQ [REQsent] id 56 len 20 > > 01:09:32: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:32: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:32: As5 LCP: PFC (0x0702) > > 01:09:32: As5 LCP: ACFC (0x0802) > > 01:09:34: As5 LCP: TIMEout: State REQsent > > 01:09:34: As5 LCP: O CONFREQ [REQsent] id 57 len 20 > > 01:09:34: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:34: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:34: As5 LCP: PFC (0x0702) > > 01:09:34: As5 LCP: ACFC (0x0802) > > 01:09:36: As5 LCP: TIMEout: State REQsent > > 01:09:36: As5 LCP: O CONFREQ [REQsent] id 58 len 20 > > 01:09:36: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:36: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:36: As5 LCP: PFC (0x0702) > > 01:09:36: As5 LCP: ACFC (0x0802) > > 01:09:38: As5 LCP: TIMEout: State REQsent > > 01:09:38: As5 LCP: O CONFREQ [REQsent] id 59 len 20 > > 01:09:38: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:38: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:38: As5 LCP: PFC (0x0702) > > 01:09:38: As5 LCP: ACFC (0x0802) > > 01:09:40: As5 LCP: TIMEout: State REQsent > > 01:09:40: As5 LCP: O CONFREQ [REQsent] id 60 len 20 > > 01:09:40: As5 LCP: ACCM 0x000A0000 (0x0206000A0000) > > 01:09:40: As5 LCP: MagicNumber 0x0693405F (0x05060693405F) > > 01:09:40: As5 LCP: PFC (0x0702) > > 01:09:40: As5 LCP: ACFC (0x0802) > > 01:09:42: As5 LCP: TIMEout: State REQsent > > 01:09:42: As5 LCP: State is Listen > > 01:09:44: %LINK-5-CHANGED: Interface Async5, changed state to > reset > > 01:09:44: As5 LCP: State is Closed > > 01:09:44: As5 PPP: Phase is DOWN > > 01:09:47: As5 IPCP: Remove route to 192.168.2.1 > > 01:09:49: %LINK-3-UPDOWN: Interface Async5, changed state to > down > > 01:09:49: As5 LCP: State is Closed > > ________________________________________________ > Get your own "800" number > Voicemail, fax, email, and a lot more > http://www.ureach.com/reg/tag Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31135&t=30767 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
