On Wed, 9 Jan 2002, Ed Chuchaisri wrote: > Now my question is can I hook up the modem to the serial port with > the DB60 to RS232 cable and configure it to do the dial backup? If > so, could someone give me some site that explains how this works or > maybe someone can give me a sample configuration..
Hi Ed, I've done this before with a 1601. The major thing to note is not all rotuers with 60pin serials can do async data from a modem. 1600's can, lower end 2500's can't, 5200's can't, etcetera. Check out the docs first. There's no different config, other than entering 'physical-layer async' on the Serial interface. Rgds, - I. -- Ian Henderson CCNA, CCNP Network Engineer, iiNet Limited Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31501&t=31491 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
