we cluster our 3548's and we use cli.... We cluster eight in a stack and run two gige connection into the stack...one on top and one on bottom for redundancy. Clustering not only allows for wuicker upgrading but you can manage each switch through one ip... (cool for snmp)
here is what your configs should look like. cluster enable or2ndfloor 0 >> "Doug Korell" 01/11/02 02:50PM >>> Is anyone using clustering for 3500's and have an opinion on it? About the only advantage I see is you can upgrade multiple switches at a time which can save time considering all the steps involved with upgrading them. Has anyone had problems with clustering? One thing I don't really like is the (perceived) dependency of setting it up through the web interface. Personally, I like using command line and the web interface is too slow. Thanks. Doug Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31672&t=31668 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
